JK604D for automotive and aerospace industrial applications

The peak power specification of the JK604D at 16kW provides sufficient energy to percussion drill a wide range of automotive and aerospace components.  The JK604D can be used for:

Typical applications include drilling of film cooling holes (effusion) holes in jet engine and gas turbine components such as nozzle guide vanes, blade and combustor liners. The JK604D also includes pulse shaping capability, which can be used to improve hole geometrical quality. The JK604D maintains the unique JK features via LaserView™ complete cycle programming triggered by a single command, increased process benefits from pulse shaping capability for tighter process control and a faster shutter interface for quicker response in parameter changes

Production proven technology, with important new field-tested enhancements

The award winning JK700 series of Nd:YAG lasers has long been the benchmark by which pulsed Nd:YAG laser performance has been measured. In our new generation of JK lasers, GSI Group has combined over three decades of experience in industrial laser manufacturing with enhanced technologies for the best overall value, dependability and cost of ownership.  Backed by GSI Group’s industry-leading applications expertise and worldwide support network, these reliable lasers will work harder than ever for you.

Perfomance Data
Model JK604D
Max. Average Power 190 W
Working Power Range 120 W – 190 W
Max. Peak Power 16 kW
Max. Pulse Energy 35 J
Repetition Rate Range 0.2 – 500 Hz
Pulse Width Range 0.2 – 2.5 ms
Beam Quality (Half-angle. Radius) 4 mm.mrad
Shutter Opening Time <50 ms
Pulse to Pulse Stability ±3%
Environmental Data
Cooling Water Requirements @ 15°C input 17 l/min
Cooling Requirement 10 kW
Max. Pressure Drop 2 Bar
Max. Inlet Pressure 6 Bar
Electrical Requirements 380-415 V, 3 Phase +/- 10%, 50-60 Hz
Supply Rating 16 kVA
Max. Power Consumption 9 kW
Ambient Temperature 5 – 40°C
Humidity 95% RH at 20%
Weight (PSU / Head) 350kg / 110kg